Freelander - Torque Settings - Engine TD4
Torque Settings - Engine TD4
NOTE - current data only applies to MY01 >
Torque Description |
Metric (Nm) | Imperial (lbf.ft) |
Acoustic cover to engine | 8 | 6 |
Ancillary drive belt jockey pulley Allen bolt * | 24 | 18 |
Ancillary drive belt tensioner arm nut | 10 | 7.5 |
Big end bearing cap bolts:
|
|
|
Camshaft bearing cap bolts * | 10 | 7.5 |
Camshaft cover bolts | 10 | 7.5 |
Camshaft sprocket retaining screw:
|
|
|
Chain lubrication jet bolt | 10 | 7.5 |
Coolant rail to exhaust manifold bolts | 20 | 15 |
Coolant rail to exhaust manifold bolts | 8 | 6 |
Crankshaft pulley:
|
|
|
Crankshaft rear oil seal housing:
|
|
|
Cylinder block reinforcing plate | 22 | 16 |
Cylinder head bolts: (Stages 1 to 5
relate to bolts 1 to 11. Stage 6 is for bolt 12 only.)
|
|
|
Cylinder head to timing cover Allen screws | 15 | 11 |
Dipstick tube to oil filter housing bolt | 10 | 7.5 |
Drive plate to crankshaft bolts | 115 | 85 |
EGR cooler to cylinder head and lifting bracket bolts | 25 | 18 |
Engine breather pipe to air cleaner housing bolt | 10 | 7.5 |
Engine lifting eye bolts | 20 | 15 |
Engine mounting bracket assembly to engine bolts | 100 | 74 |
Engine mounting bracket to hydramount nut | 85 | 63 |
Engine lower steady bracket bolts:
|
|
|
Engine steady mounting bolt | 100 | 74 |
Exhaust manifold to cylinder head nuts | 24 | 18 |
Flywheel to crankshaft bolts | 115 | 85 |
Fuel pipe bracket to oil filter housing bolt | 10 | 7.5 |
Fuel pipe union nuts | 30 | 22 |
Fuel pump drive chain lower guide Allen bolt | 24 | 18 |
Fuel pump sprocket retaining nut | 65 | 48 |
Fuel rail Allen screws | 24 | 18 |
Fuel rail to coolant rail bolts | 10 | 7.5 |
Fuel rail to support bracket bolts | 10 | 7.5 |
Glow plugs | 18 | 13 |
Heatshield to coolant rail Allen screws | 8 | 6 |
Hose adaptor to cylinder head bolts | 8 | 6 |
LH engine mounting to gearbox bracket through bolt | 100 | 74 |
LH engine mounting to body | 45 | 33 |
Lower coolant rail support bracket bolts | 15 | 11 |
Main bearing cap bolts:
|
|
|
Oil cooler to oil filter housing bolts | 22 | 16 |
Oil feed guide rail bolts | 10 | 7.5 |
Oil filter cap | 25 | 18 |
Oil filter housing bolts | 25 | 18 |
Oil pick-up strainer to oil pump bolts | 10 | 7.5 |
Oil pressure switch | 38 | 28 |
Oil pump drive gear to oil pump drive shaft Torx bolt | 25 | 18 |
Oil pump to cylinder block | 25 | 18 |
PAS pipe clip to engine lifting eye bolt | 10 | 7.5 |
Sump:
|
|
|
Sump drain plug | 28 | 21 |
Sump plate bolts | 10 | 7.5 |
Timing chain support guides | 20 | 15 |
Timing chain tensioner access plug | 30 | 22 |
Timing chain tensioner bolt | 10 | 7.5 |
Timing cover bolts | 15 | 11 |
Turbocharger to exhaust manifold bolts | 45 | 33 |
Turbocharger outlet pipe fixing bolts:
|
|
|
Vacuum pump bolts | 22 | 16 |
Tighten in sequence
* Fit new bolt