Freelander - Volumetric Sensor Deletion
VOLUMETRIC SENSOR DELETION - SPECIFICATION CHANGE
Bulletin Number - 0018
Issue - 1
Date - 19.01.2000
Model - Freelander
Affected Range - All derivatives for all Markets except UK, BELGIUM and HOLLAND.
Re-Issue Information
Problem -
VOLUMETRIC SENSOR DELETION - SPECIFICATION CHANGE
Cause
As from 10th January 2000 the alarm system volumetric sensor will become standard fit for the following markets only: UK, BELGIUM and HOLLAND.
For all other markets, the volumetric sensor will NOT be fitted to vehicles ordered and built on or after 10.01.2000, unless it is ordered as a factory fitted option by the customer. The vehicle invoice document will show if the volumetric sensor has been supplied as a factory fitted option.
Action
For Markets other than UK, BELGIUM & HOLLAND, refer to the vehicle invoice document at the PDI stage to establish whether a volumetric sensor is fitted.
It is possible, when using Testbook to configure the Central Control Unit (CCU) to the appropriate Market condition, that a fault may be detected against the volumetric sensor due to the sensor not being fitted.
In this instance, the fault detection should be ignored as there is no fault with the vehicle and no fault will be apparent to the customer.
Parts Information
Not applicable
Warranty
Not applicable
