Freelander - High Rear Seat Release And Shut Loads
HIGH REAR SEAT SQUAB RELEASE AND SHUT LOADS - STRIKER SETTING
Bulletin Number - 0004
Issue - 1
Date - 11.02.1998
Model - Freelander
Affected Range - All vehicles
Re-Issue Information
Problem -
HIGH REAR SEAT SQUAB RELEASE AND SHUT LOADS - STRIKER SETTING
Customer complains of difficulty in releasing or securing the rear seat squab/s.
Cause
Squab striker loop incorrectly set.
Action
Reset the striker/s using the following procedure:
1. Release squab and fold down.
2. Slacken the two 13 mm AF screws retaining the striker loop so that it is just free to move .
3. Re-latch the squab onto the striker loop.
4. Release squab and fold down.
5. Tighten screws whilst pushing the loop outboard, ensuring that the loop is maintained in a horizontal position. Torque to 25 Nm.
6. Re-latch seat and check latch performance.
Parts Information
Not applicable
Warranty
Use Complaint Code: 8H6A
Use S.R.O.: 78.80.45 Striker - rear seat squab - each
Time allowance: 0.10 Hrs
Use S.R.O.: 78.80.46 Strikers - rear seat squab - pair
Time allowance: 0.20 Hrs